|
|
|
|
 |
Home > Pond
Care Ammo-Lock
Pond
Care Ammo-Lock has been uniquely developed to eliminate the toxic
effects of chlorine, chloramine and ammonia that may be present in
municipal water used to fill ponds. Fish waste, decomposing algae,
plants and uneaten fish food produce ammonia. Ammonia, which is a
colorless and odorless toxic chemical, is the number one killer of pond
fish. Ammo-Lock also detoxifies harmful levels of ammonia that
can occur in pond water from overfeeding and overstocking of fish.
Ammo-Lock is patented formula instantly neutralizes both chlorine and chloramine and effectively "locks up' any potential ammonia or
immediate ammonia up to 5 ppm per dose. Although ammonia will still be
present in pond water, converts the ammonia to a form
that is nontoxic to aquatic life; this nontoxic form actually serves as
a source of nutrition for nitrifying bacteria in the biological filter.
Ammonia build-up can occur whenever starting a new pond, before
biological filtration becomes active, or when there is inadequate
biological filtration. You
should also use Pond Care BioFilter Booster to speed the
development of the biological filter.
Pond
Care Ammo-Rocks remove ammonia from pond water by ion exchange,
while Ammo-Lock neutralizes ammonia but does not remove it.
Consequently, ammonia test kits will still show positive results for,
ammonia when testing water treated with Ammo-Lock. Neutralization
of ammonia toxicity can only be assayed using cell culture techniques.
Cell culture studies in fact have demonstrated the effectiveness of
Ammo-Lock in neutralizing ammonia's toxic effects on living fish
tissue. Extensive research and field-testing also have shown Ammo-Lock
to be nontoxic to pond fish, pond plants and amphibians.
Ammo-Lock was proven to be so unique and effective by these studies, that is has
been granted a United States patent.
Directions
For Use:
To
Neutralize Chlorine and Chloramine:
Add five teaspoonfuls (25 ml) of Ammo-Lock for every 100 U.S. gallons (378 L / 83 UK Imp. Gal.) of pond water. Treat the pond with Ammo-Lock BEFORE adding tap water to the pond. One dose of Ammo-Lock will neutralize 2.0 ppm of chlorine and 1.0 ppm of chloramine. Detoxifying
Ammonia in Pond Water:
Add
five teaspoonful (25 ml) of Ammo-Lock for every 100 U.S.
gallons (378 L / 83 UK Imp.
Gal.) of pond water. One dose of Ammo-Lock will detoxify
1.5 ppm of ammonia. Ammo-Lock will hold the ammonia in a
non-toxic form until the biological filter converts the ammonia into
nitrite and then to non-toxic nitrate. Ammonia test kits will test
positive for ammonia when using Ammo-Lock. Ammonia levels will
drop as the biological filter breaks down the converted ammonia,
allowing you to monitor the production of ammonia and the efficiency of
the filter.
If
swallowed, immediately give 2 glasses of water and induce vomiting. Call
a physician. In case of contact with skin and eyes, immediately flush
with water for at least 15 minutes. Call a physician.
Keep Out of Reach of Children. For Garden Pond Use Only. Not
for human consumption or for the treatment of fish intended for human
consumption.
|
Place an Order Important Information Related Products
|
||||||||||||||||||||||
Unit Liner Company © 1998-2008 Unit Liner Company. All Rights Reserved. |
|||||||||||||||||||||||
